TEC (Peltier) Controller PLC-24V10A
24V/10A PWM drive multi-functional high performance TEC(Peltier) temperature controller.
Main board with display
Main board
Overview
✓ PWM switching drive, it is possible to drive a large current of up to 10A. ✓ It supports low voltage TEC (Peltier) drive Single power supply : 3V to 24V / Dual power supply : 0.5V to 24V ✓ NTC thermistor / Pt Sensor ✓ An output for DC cooling fan is available. ✓ Sub temperature sensor (NTC thermistor) ✓ Wide temperature range Pt100: -50°C to +150°C / NTC thermistor: -40°C to +100°C ✓ Digital PID Control ✓ Temperature watcher (Indicator) function ✓ Parallel outputs (Alarm / Indicator) ✓ Continuous operation mode and timer operation mode. ✓ Can be set itself and make operate using display board ✓ RS-232 interface ✓ Small form factor suitable for built-in (Main board dimensions : W85mm x D65mm)
Specification
| Item | Value | Remarks |
|---|---|---|
| Power supply | DC 3V to 24V | Single power supply |
| Power supply | DC 0.5V to 24V (VP for Peltier drive) DC 3V to 24V (VC for control circuit) | Dual power supply |
| Current consumption (Main board) |
150mA (Max) | Peltier drive current and DC fan Current is not included |
| Current consumption (Display board) |
90mA (Max) | |
| Peltier drive voltage | 3V to 24V (Single power supply) | It depends on power supply voltage |
| 0.5V to 24V (Dual power supply) | It depends on power supply voltage (VP) | |
| Peltier drive current | 10A (Max) | The drive current is limited by the internal resistance and the thermo-electromotive force of Peltier element |
| Peltier drive method | PWM | Cooling / Heating bipolar drive |
| Main temperature sensor |
Pt100 NTC thermistor (R25=10kohm) |
Support 3-wire / 2-wire Pt sensor 9 presets and 1 user setting for NTC thermistor ∗ Sensor type is selectable by the setting software |
| Sub temperature sensor |
NTC thermistor (R25=10kohm) | 9 presets and 1 user setting for NTC thermistor ∗ Sensor type is selectable by the setting software |
| Control method | Digital PID control | ∗ PID control parameters can be changed by the setting software |
| Temperature range | -50°C to +150°C (Pt100) | ∗ Temperature range can be changed by the setting software |
| -40°C to +100°C (NTC thermistor) | ||
| Temperature resolution | 0.1°C | |
| Timer setting range | 0.1min to 999.9min 0.1hour to 720hour |
Set in the unit of the number of minute or hour Time accuracy ±1% |
| Operating temperature / humidity |
10°C to 40°C / 5%RH to 85%RH | No condensation |
| Storage temperature / humidity |
-20°C to 60°C / 5%RH to 90%RH | No condensation |
∗ TEC(Peltier) controller PLC series comparison chart.
Accessories
✓ RS232 cable assembly (Cable length = 100mm) ✓ Instruction Manual
Notice
✓ Product specifications and appearance are subject to change for improvement. ✓ Small enclosure edition is available. Please contact us for more information.
Documents
- Reference Manual
- PDF document, size 1.10KB
- Quick Start Manual
- PDF document, size 508MB
Software
- Control software
- ZIP file, size 323KB
- Control software Manual
- PDF document, size 652KB
- Setting software
- ZIP file, size 140KB
- Setting software Manual
- PDF document, size 496KB
∗ These software are available for free. ∗ These software work on Windows XP or upper version.